iE head studs are manufactured using a rolled method in a pure oil solution. The alloy material is shaped rather than removed (cut) which creates a compressive force that strengthens the thread and eliminates imperfections that could cause stress cracks. Rolled threads are built for strength and extreme fatigue resistance.
This is a Universal Fitting Product
This Part Fits Your Vehicle
Free Shipping
Product Information
Meet your ultimate defense against head lift. iE HoldStrong Head Studs are engineered and manufactured for structural integrity to go toe-to-toe with the demands of high-output engines. They’re made to keep your engine together and sealed tight using a rolled-thread process, chromium-based H11 tool steel and aircraft grade J-threads for maximum strength.
It’s not rocket science, but it’s close. Our chromium-based H11 tool steel alloy is known for its use in aerospace industry applications like helicopter blades and landing gear. H11 is widely used for its crack-resistant properties to prevent thermal fatigue or thermal shock. This alloy’s low-carbon content gives it strength with minimal distortion when tooling. If it’s good enough to land a plane, it’s the right choice for your high-performance engine.
IT'S ALL IN THE THREADS
iE ROLLED THREADS
- Precise surface finish
Roll forming the threads in a contained die produces an incredibly smooth thread surface that greatly reduces the chances of stress cracks. - Compressed material
Instead of removing material, the alloy is compressed to form the threads which greatly increases strength and fatigue resistance. To maintain the structural integrity of the material during this process, heat caused by friction is reduced using a cooling oil. - Accurate thread profile
The precise thread forming also produces a very consistent thread profile and dimensional accuracy, which delivers greater thread engagement and improves the overall performance of the fastener.
TRADITIONAL CUT THREADS
- Surface imperfections
The thread surface of a machined (cut) fastener is at risk to surface chatter and burrs. These small imperfections can cause stress concentrations and thread failure. - Removed material
Forming the threads by cutting material away removes and weakens the alloy. Less material means lower strength and fatigue resistance. - Unstable thread profile
While faster and cheaper to produce, cut threads can not maintain a truly consistent thread profile, making them less than ideal for critical clamping loads required for performance builds.
NOT ALL THREADS ARE EQUAL
The sharp edges and corners of standard cut thread can cause stress points that lead to bolt failure. To prevent this, iE head studs have been engineered with J-threads. This higher quality thread profile has a curved minor-diameter structure to reduce stress points and prevent breakage from vibration. J-threads also provide a more accurate sizing for an exact dimensional fit.
WHAT IS HEAD LIFT?
The VW and Audi MQB Gen 3 EA888 engine is an incredibly popular platform for power hungry enthusiasts. With many builders pushing into bigger turbos, race fuels, and big boost it's not uncommon to see these engines pushing 500+HP. These massive gains result in higher cylinder pressures that put a lot of stress on the factory head bolts. When the factory bolts hit their limit, they stretch and cause head lift. This breaks the cylinder head gasket seal which results in compression loss, oil/coolant contamination, loss of power, and in extreme conditions; catastrophic engine failure.
Features:
- Turn it up -Engineered to meet the demands of high-power engines
- 211 ksi yield strength -Never worry about head lift again
- Ultimate strength -Chromium-based H11 tool steel alloy
- Aerospace-style J threads -Minimizes stress points
- Rolled threads in pure oil solution -Precision thread profile
What's Included:
- Integrated Engineering HoldStrong Head Studs
NOTE: Product images shown may not be an exact representation of the actual product.
Model  +  |
Drivetrain  |
|---|---|
| 8V A3 2.0T I4 [MQB] | + |
| 8V S3 2.0T I4 [MQB] | |
| MK7 GTI 2.0T I4 [MQB] | |
| MK7 Jetta - GLI 2.0T I4 [MQB] | |
| MK7 R 2.0T I4 [MQB] |
Return and Exchange Policy
The Return & Exchange Policy below outlines our current terms. While we try to adhere strictly to the guidelines detailed below, there are always exceptions to the rules, please speak to a BMP Tuning Customer Support Representative for clarification on anything you might have questions about - contact us.
Order Cancellations
Order Cancellation Hours of Operation
- All order cancellations are processed during regular business hours only. Any order cancellation requests made outside of normal business hours will be processed during the next business day.
Order Cancellation Fees
- Any cancelled orders including orders that have not shipped will be subject to a 5% cancellation fee to offset order processing fees that are not refunded to BMP Tuning by financial institutions and fee is waived completely if store credit is requested.
- Cancellation fee applies to any order regardless of stock status, please contact BMP Tuning if there are any questions regarding stock status before placing an order.
- If an order has already been processed or shipped and BMP Tuning is unable to cancel the order, the customer will be responsible for returning the item to us once received. Once the return is received it will be processed like any other return and be subject to the "Return and Exchange Policy" listed below.
- Certain products sold cannot be cancelled after the order has been placed due to agreements with the manufacturer, or in the case of made to order/custom items. This may be noted in the product description, but feel free to contact us to make sure before ordering.
- Any order placed via Katapult are non-refundable; refunds, if required, will be issued via store credit only.
Return & Exchange Policy
Domestic Orders
- BMP Tuning will accept returns for unused products within 1 year/365 Days from the date of purchase.
- Returned products must be new, unused, and must be in the original packaging, including labeling, manuals, hardware, etc. Special order items are non-refundable.
- Returns will NOT be processed for any received products without the proper RMA Form completed and included with the return, customer will also be responsible for return shipping to their original shipping address.
- Returns beyond 60 days of original purchase once processed can only be refunded as BMP Tuning store credit.
- In the case of an exchange, BMP Tuning will waive normal restocking fees and only collect for original shipping of the returned product unless otherwise stated by a BMP Tuning Customer Service Representative when requesting your RMA number.
- Once store credit has been issued for a return, it is final and cannot be reversed or exchanged for a refund to your original payment method at a later time. Please ensure you are comfortable with receiving store credit before completing your return.
- Contact us within 7 days of delivery if an item has arrived damaged or incorrectly so that we can rectify the situation with the responsible party. Any notifications past 7 days from delivery could cause issues with replacement and BMP Tuning is not liable for any mis-shipments or damaged items if notified past the 7th day.
- Once delivered to shipping address provided, packages are customer’s responsibility—consider requesting a signature upon delivery or insuring your order with Route.
International Orders
- New, unopened products can be returned within 60 days of purchase.
- Opened/used products and Scratch & Dent parts cannot be returned.
- Contact us within 7 days if your item is damaged upon receipt.
- Once delivered, packages are customer’s responsibility—signature confirmation is available upon request.
- Any international orders that are refused at the time of delivery will be subject to carrier abandonment of the package, at which time the ordered products would be discarded by the carrier. The customer will not be refunded for the value of the order and the discarded products are no longer retrievable.
Return Fees & Shipping:
- Customer is responsible for a 20% restocking fee, original shipping, and return shipping.
- In instances where the customer received FREE shipping, the shipping amount that BMP Tuning paid on behalf of the customer will be deducted from the total refund.
- BMP Tuning's restocking fee is waived in the instance customer requests store credit as long as the item is being returned to BMP Tuning and not the manufacture directly.
- Any orders that are returned to BMP Tuning as refused by receiver or non-deliverable will be subject to a return handling fee and will be processed as a return in compliance with our "Return and Exchange Policy", including a 20% restocking fee.
- Any returns that are denied for any reason will be sent back to the customer at the customers expense. Any denied return left with BMP Tuning longer than 30 days is considered forfeited by the customer and will be disposed of by BMP Tuning at BMP Tuning's discretion.
- Any order placed via Katapult are non-refundable; refunds, if required, will be issued via store credit only.
Route Shipping Protection - Refunds & Cancellations
- Route shipping protection is an insurance purchased for your shipment. Because of this, any protection on items that have already been shipped cannot be refunded.
- If your order is cancelled PRIOR to the items shipping, then the Route purchase can be refunded with the cancelled item(s). Once the order has shipped, we cannot refund the Route shipping protection.
Tariffs & Duties – No Refund Upon Return
- BMP Tuning is not responsible for any tariffs, duties, or import fees charged by customs authorities or shipping carriers.
- If you return an item, any tariff or duty you paid at delivery will not be refunded by BMP Tuning, as those are non-refundable government charges.
- Refunds for returned items will be limited to the cost of the product (minus applicable fees), not including any tariffs or duties originally paid.
Additional Notes
- Please ensure you understand your country’s import fee obligations prior to ordering.
- If you have questions about potential tariffs, duties, or returns, contact us before placing your order—we’re happy to assist.
- All existing policy conditions (restocking fees, RMA requirement, return shipping responsibilities) still apply as stated in the original policy.
Product Return Exemptions
Tuning Software And Cables
BMP Tuning will NOT accept returns for any tuning software or tuning cables. This includes, but is not limited to:
- ECU Tunes
- TCU Tunes
- Tuning Cables such as IE POWERlink V4 Flash Cable, APR Ultralink, Unitronic UniCONNECT+ Cable, 034Motorsport Dynamic+ Tuning Cable
- Plug and Play Tuners such as Burger Motorsports JB4, COBB AccessPort
- OBDEleven Pro
Scratch & Dent, Open Box, and Clearance Items
There are absolutely no returns on any product sold as "Scratch & Dent", "Open Box", or "Clearance."
Pricing Or Photo Errors
- While we always try to provide the most accurate product and pricing information, we are humans and can make mistakes. If we listed an incorrect price or information for any product on our site, BMP Tuning reserves the right to refuse or cancel any orders placed. PRICING AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
- We try to ensure that all products are represented properly in description and photo. However, due to photos provided from manufacturers, sometimes a photo might be outdated or a generic photo for the part may be used for the item. If you have any questions about any product, please contact us before placing your order.
Need help with your order?
