This is a Universal Fitting Product
This Part Fits Your Vehicle
Product Information
Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver's disposal.
Simple Plug-and-Play Installation:
For vehicles with electronic control (ETC) systems, or drive by wire, this device plugs into the OE connector located behind the accelerator pedal. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. It does not affect other systems such as electronic injection, ABS, etc.
Three Acceleration Modes:
The three main acceleration modes can be switched by pressing the main button. When the LED is off, the Sprint Booster is deactivated, and the car has factory settings. In Sport Mode, the LED is green, and throttle response is improved by up to 30%. With the red colored LED, the Sprint Booster is in Race Mode, and it improves response by up to 60%.
18 Acceleration Programs:
Each acceleration mode comes with nine programs. Select 1-9 in SPORT mode and 1-9 in RACE mode, with '1' being the least aggressive program and '9' the most aggressive. The acceleration programs can be changed using the two arrow buttons on the top of the device. By selecting the desired acceleration program in each mode, the driver can fine-tune each mode per their driving style (e.g. select SPORT 9 & RACE 5).
Works for Both Automatic and Manual Transmissions:
Sprint Booster modes and programs are transmission type specific for better function and performance. The driver can select the transmission type through a slide switch located on the right side of the device. The device will then automatically adjust the programs according the type of transmission selected. There are 36 programs in total (18 for manual transmissions and 18 for automatic transmissions).
Valet and Pedal Lock Modes:
Valet mode limits the acceleration of the vehicle by 55%, 65%, or 75% (comes in three selectable levels). It is activated and deactivated with a three-digit PIN. By limiting the acceleration, there will be a significant reduction in the vehicle's performance. The Pedal Lock mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle through a 3 digit PIN. The menu for Valet and Pedal Lock mode is accessed when the vehicle is stationary and the Sprint Booster is off, by pressing the two arrow buttons simultaneously.
Better Drivability:
In addition to increased throttle response for effortless downshifts and safer overtaking, there is also a noticeable improvement to the transmission’s shifts (on vehicle’s equipped with automatic transmissions).
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Features:
- Simple, Plug-and-Play Installation
- Ultra Compact Device Mounts in the Cabin
- 3 Acceleration Modes w/ 18 Acceleration Programs
- Valet and Pedal Lock Mode Provide Protection Against Unauthorized Vehicle Use
What's Included:
- aFe Sprint Booster V3 Power Converter
NOTE: Product images shown may not be an exact representation of the actual product.
Model + ![]() |
Drivetrain ![]() |
|---|---|
| F20 114i-120i 1.6T I4 [N13] | + |
| F20 125i 2.0T I4 [B48] | + |
| F20-F21 M135i 3.0T I6 [N55] | + |
| F20-F21 M140i 3.0T I6 [B58] | + |
| F21 114i-120i 1.6T I4 [N13] | + |
| F21 125i 2.0T I4 [B48] | + |
| F22 - F23 - F87 220i 2.0T I4 [N20] | + |
| F22 - F23 - F87 228i 2.0T I4 [N20] | + |
| F22 - F23 - F87 M2 3.0T I6 [N55] | + |
| F22 - F23 - F87 M2 Competition 3.0T I6 [S55] | + |
| F22 - F23 - F87 M235i 3.0T I6 [N55] | + |
| F22 - F23 - F87 M240i 3.0T I6 [B58] | + |
| F22 228i 2.0T I4 [N26] | + |
| F22 230i 2.0T I4 [B48] | |
| F30 - F80 328i 2.0T I4 [N20] | + |
| F30 - F80 335i 3.0T I6 [N55] | + |
| F30 - F80 340i 3.0T I6 [B58] | + |
| F30 - F80 M3 3.0T I6 [S55] | + |
| F32 - F33 - F36 - F82 - F83 428i 2.0T I4 [N20] | + |
| F32 - F33 - F36 - F82 - F83 435i 3.0T I6 [N55] | + |
| F32 - F33 - F36 - F82 - F83 440i 3.0T I6 [B58] | + |
| F32 - F33 - F36 - F82 - F83 M4 3.0T I6 [S55] | + |
| F82 M4 3.0T I6 [S55] | + |
| F87 M2 CS 3.0T I6 [S55] | + |
| G29 Z4 M40i 3.0T I6 [B58] | |
| G29 Z4 sDrive20i 2.0T [B48] | |
| G29 Z4 sDrive30i 2.0T [B48] | |
| Z3 2.5L I6 [M54] | |
| Z3 3.0L I6 [M54] | + |
| Z3 3.2L I6 [S54] |
Return and Exchange Policy
The Return & Exchange Policy below outlines our current terms. While we try to adhere strictly to the guidelines detailed below, there are always exceptions to the rules, please speak to a BMP Tuning Customer Support Representative for clarification on anything you might have questions about - contact us.
Order Cancellations
Order Cancellation Hours of Operation
- All order cancellations are processed during regular business hours only. Any order cancellation requests made outside of normal business hours will be processed during the next business day.
Order Cancellation Fees
- Any cancelled orders including orders that have not shipped will be subject to a 5% cancellation fee to offset order processing fees that are not refunded to BMP Tuning by financial institutions and fee is waived completely if store credit is requested.
- Cancellation fee applies to any order regardless of stock status, please contact BMP Tuning if there are any questions regarding stock status before placing an order.
- If an order has already been processed or shipped and BMP Tuning is unable to cancel the order, the customer will be responsible for returning the item to us once received. Once the return is received it will be processed like any other return and be subject to the "Return and Exchange Policy" listed below.
- Certain products sold cannot be cancelled after the order has been placed due to agreements with the manufacturer, or in the case of made to order/custom items. This may be noted in the product description, but feel free to contact us to make sure before ordering.
- Any order placed via Katapult are non-refundable; refunds, if required, will be issued via store credit only.
Return & Exchange Policy
Domestic Orders
- BMP Tuning will accept returns for unused products within 1 year/365 Days from the date of purchase.
- Returned products must be new, unused, and must be in the original packaging, including labeling, manuals, hardware, etc. Special order items are non-refundable.
- Returns will NOT be processed for any received products without the proper RMA Form completed and included with the return, customer will also be responsible for return shipping to their original shipping address.
- Returns beyond 60 days of original purchase once processed can only be refunded as BMP Tuning store credit.
- In the case of an exchange, BMP Tuning will waive normal restocking fees and only collect for original shipping of the returned product unless otherwise stated by a BMP Tuning Customer Service Representative when requesting your RMA number.
- Once store credit has been issued for a return, it is final and cannot be reversed or exchanged for a refund to your original payment method at a later time. Please ensure you are comfortable with receiving store credit before completing your return.
- Contact us within 7 days of delivery if an item has arrived damaged or incorrectly so that we can rectify the situation with the responsible party. Any notifications past 7 days from delivery could cause issues with replacement and BMP Tuning is not liable for any mis-shipments or damaged items if notified past the 7th day.
- Once delivered to shipping address provided, packages are customer’s responsibility—consider requesting a signature upon delivery or insuring your order with Route.
International Orders
- New, unopened products can be returned within 60 days of purchase.
- Opened/used products and Scratch & Dent parts cannot be returned.
- Contact us within 7 days if your item is damaged upon receipt.
- Once delivered, packages are customer’s responsibility—signature confirmation is available upon request.
- Any international orders that are refused at the time of delivery will be subject to carrier abandonment of the package, at which time the ordered products would be discarded by the carrier. The customer will not be refunded for the value of the order and the discarded products are no longer retrievable.
Return Fees & Shipping:
- Customer is responsible for a 20% restocking fee, original shipping, and return shipping.
- In instances where the customer received FREE shipping, the shipping amount that BMP Tuning paid on behalf of the customer will be deducted from the total refund.
- BMP Tuning's restocking fee is waived in the instance customer requests store credit as long as the item is being returned to BMP Tuning and not the manufacture directly.
- Any orders that are returned to BMP Tuning as refused by receiver or non-deliverable will be subject to a return handling fee and will be processed as a return in compliance with our "Return and Exchange Policy", including a 20% restocking fee.
- Any returns that are denied for any reason will be sent back to the customer at the customers expense. Any denied return left with BMP Tuning longer than 30 days is considered forfeited by the customer and will be disposed of by BMP Tuning at BMP Tuning's discretion.
- Any order placed via Katapult are non-refundable; refunds, if required, will be issued via store credit only.
Route Shipping Protection - Refunds & Cancellations
- Route shipping protection is an insurance purchased for your shipment. Because of this, any protection on items that have already been shipped cannot be refunded.
- If your order is cancelled PRIOR to the items shipping, then the Route purchase can be refunded with the cancelled item(s). Once the order has shipped, we cannot refund the Route shipping protection.
Tariffs & Duties – No Refund Upon Return
- BMP Tuning is not responsible for any tariffs, duties, or import fees charged by customs authorities or shipping carriers.
- If you return an item, any tariff or duty you paid at delivery will not be refunded by BMP Tuning, as those are non-refundable government charges.
- Refunds for returned items will be limited to the cost of the product (minus applicable fees), not including any tariffs or duties originally paid.
- Please ensure you understand your country’s import fee obligations prior to ordering.
- If you have questions about potential tariffs, duties, or returns, contact us before placing your order—we’re happy to assist.
- All existing policy conditions (restocking fees, RMA requirement, return shipping responsibilities) still apply as stated in the original policy.
Product Return Exemptions
Tuning Software And Cables
BMP Tuning will NOT accept returns for any tuning software or tuning cables. This includes, but is not limited to:
- ECU Tunes
- TCU Tunes
- Tuning Cables such as IE POWERlink V4 Flash Cable, APR Ultralink, Unitronic UniCONNECT+ Cable, 034Motorsport Dynamic+ Tuning Cable
- Plug and Play Tuners such as Burger Motorsports JB4, COBB AccessPort
- OBDEleven Pro
Scratch & Dent, Open Box, and Clearance Items
There are absolutely no returns on any product sold as "Scratch & Dent", "Open Box", or "Clearance."
Pricing Or Photo Errors
- While we always try to provide the most accurate product and pricing information, we are humans and can make mistakes. If we listed an incorrect price or information for any product on our site, BMP Tuning reserves the right to refuse or cancel any orders placed. PRICING AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
- We try to ensure that all products are represented properly in description and photo. However, due to photos provided from manufacturers, sometimes a photo might be outdated or a generic photo for the part may be used for the item. If you have any questions about any product, please contact us before placing your order.
Need help with your order?


+ 


