Now offering 0% Financing with  |  ☎ (972) 677-7604  |  ✉ sales@bmptuning.com

Integrated Engineering ECU Performance Tune - Audi B9/B9.5 RS4/RS5


Free ShippingSave 15%
Integrated EngineeringSKU: IESOVZ21 DIY Difficulty: EASY


Select Tune: Stage 1
Add Stage 2 TCU Tune?: No Thanks
IE Direct-Port Flash Tool: -
Price:
$764.15 $899

Availability:
Direct Ship!

Buy Now & Pay over time with

Product Questions & Answers

Product Questions & Answers

Be the first to ask a question!

Ask a Question

Description

IE's 2.9T ECU upgrade dramatically increases horsepower, torque, engine response, power delivery, and more to release the full performance potential from your 2018-2023 Audi RS5 or RS4! Multiple stages are available to match typical bolt-ons and offer various fuel options and features while maintaining stock comfort and reliability. Enjoy a hassle-free install in minutes through the vehicle's OBD-II port, and get ready for supercar power from your RS-class Audi!

IE Stage 1 ECU calibration is a simple flash-only upgrade that delivers instant performance with up to 542HP and 558ft-lbs of torque! The larger powerband, 7000RPM rev limit, and increased boost pressures produce exceptionally faster 0-60 times and acceleration in any scenario. This advanced calibration can be installed in an entirely stock car or will adapt to take advantage of intake and intercooler upgrades.

IE Stage 1 Plus delivers the most power possible from E85 fuel with an upgraded HPFP (High Pressure Fuel Pump). By increasing the fuel pump's ability to supply additional ethanol demands, our Stage 1 Plus tune produces an even more significant surge in power with a massive 604 horsepower and 660ft-lbs of torque! This ECU calibration pushes your Audi RS5/RS4 into a higher vehicle class of performance with an intense pull. Requires HPFP upgraded internals with 11.7mm pin size

IE Stage 2 and Stage 2 Plus ECU tunes are calibrated for aftermarket downpipes to deliver a louder exhaust note and include a more aggressive exhaust overrun/crackle feature in dynamic drive mode. The 2.9T engine includes two already efficient factory downpipes that do not result in power or exhaust restrictions on stock turbocharger ECU tunes. Although this platform does not provide additional power gains on Stage 2 tunes, IE files will provide the necessary ECU calibrations to support aftermarket downpipes for users looking for a more aggressive exhaust note.

Upgrading from Stage 1 to Stage 2 or beyond is easy! With IE, you only pay the difference in tune cost with no extra fees. After installing any required hardware, launch your IE POWERlink software and enjoy the next power level in minutes!

Features:

  • Horsepower & torque gains maximized
  • Includes 91, 93 & E85 fuel options
  • Stage 1 for stock hardware or basic bolt-ons
  • Stage 2 for full bolt-on support
  • Stage 1 & 2 Plus HPFP for maximum ethanol power
  • Stage 1 Transmission tune included with ECU purchase
  • Stage 2 Transmission tune upgrade available
  • Engine RPM limit raised to 7000RPM
  • Neutral/park free-rev limit raised to 6800 RPM
  • Recalibrated power & torque gauge displays higher output
  • Rescaled factory boost gauge shows greater boost
  • Left foot/brake boosting enabled for rolling launch
  • Eliminated/minimized turbocharger surge
  • Reduced turbocharger lag
  • Road speed limiters removed
  • More aggressive overrun/crackle in Dynamic mode (Stage 2)
  • Crackles enabled for free revving in park or neutral (Stage 2)
  • Optimized throttle scaling for dependable throttle use
  • Boost control reconfigured for smooth and crisp power delivery
  • Reliable fuel ratios for safe exhaust gas temps on all fuels
  • Engineered for all climates and elevations
  • Direct port OBDII at-home flashing

Power Results

North American Region (NAR) = AKI / Rest Of World (ROW) = RON
Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors. Peak numbers require transmission TCU Tune (sold separately).

Stage/Fuel Horsepower Torque
Stock Audi Advertised Numbers 444 HP 443 FT-LBS
Stock IE Dyno Numbers 456 HP 485 FT-LBS
Stage 1 & 2 91 AKI / 95 RON 502 HP 565 FT-LBS
Stage 1 & 2 93 AKI / 98 RON 522 HP 572 FT-LBS
Stage 1 & 2 E85 542 HP 581 FT-LBS
Stage 1 & 2 Plus E85 604 HP 668 FT-LBS

Required Hardware

Part Upgrade Compatible Requirement
Stage 1 TCU Tune (Included) Required (Included with purchase)
Stage 2 TCU Tune Compatible with all stages
Air Intake Compatible with all stages
Turbo Inlet Pipe Compatible with all stages
Intercooler Compatible with all stages
Heat Exchanger Compatible with all stages
HPFP Upgrade Requires Stage 1 or 2 Plus
Catback Exhaust Compatible with all stages
Downpipes Not Compatible With Stage 1
Part Upgrade Compatible Requirement
Stage 1 TCU Tune (Included) Required (Included with purchase)
Stage 2 TCU Tune Compatible with all stages
Air Intake Compatible with all stages
Turbo Inlet Pipe Compatible with all stages
Intercooler Compatible with all stages
Heat Exchanger Compatible with all stages
HPFP Upgrade Requires Stage 1 or 2 Plus
Catback Exhaust Compatible with all stages
Downpipes Compatible with Stage 2

What's Included:

  • Integrated Engineering CREC ECU Performance Tune
  • IE PowerLINK V3 Flash Cable (OPTIONAL)
  • IE Stage 2 TCU Tune (OPTIONAL)

Vehicle Fitment

Model   + Drivetrain  
B9 RS4 2.9T V6
B9 RS5 2.9T V6
Sale Item +

Payment & Security

Amazon American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Calculate Shipping

You may also like

Recently Viewed

Free Delivery on All Orders

over $49 for contiguous U.S.

Satisfaction Guaranteed

or we will make it right!

Top-Notch Support

for all your parts needs!

Secure Payment Processing

to keep your information safe!