This is a Universal Fitting Product
This Part Fits Your Vehicle
Product Information
CARB AND / OR EPA COMPLIANCE TESTING NOT COMPLETED
While we believe this product is either CARB EO exemption applicable, or complies with the EPA's Anti-Tampering Policy, we have not completed the required testing and administrative process at this time. This product is not available to purchase for emissions-controlled vehicles located within the state of California, or available to ship to California addresses, without a completed AMS Race Waiver form. International users outside of the United States should act in accordance with their local laws and regulations.
As horsepower numbers rise, so do temperatures through the BMW B58’s intercooling system. In order to cool down that hot intake charge air coming from the turbocharger, you need a highly efficient heat exchange process which is where the AMS Performance BMW B58 Intake Manifold comes in. With our unique parallel twin core design, we are able to route coolant flow in the most efficient way possible giving us unparalleled cooling efficiency over the competition. The AMS Performance BMW B58 Intake Manifold also provides for an auxiliary port fuel injection solution by way of its flush mounted -8AN fuel rail, giving the atomized fuel a nearly unimpeded path to the combustion chamber. Our superior engineering yields superior results.
The AMS Snailworks© Engineering Team has designed the AMS Performance BMW B58 Intake Manifold to be a direct bolt-in install without hacking up your prized possession. The manifold is fully compatible with A/C, power steering, oil filter cap, and all other factory options, and is easily reversible back to stock with a few inexpensive replacement parts. The design of the new AMS Performance BMW B58 Intake Manifold positions it to be the best performing, highest quality, and easiest to install manifold on the market.
Our AMS Snailworks© Engineering Team has spent hundreds of R&D hours refining the AMS Performance BMW B58 Intake Manifold to be as efficient and effective as possible. Utilizing Computation Fluid Dynamics (CFD) analysis software, our team has been able to verify the geometry of our A356 T6 cast aluminum plenum and runners to optimize mass flow rate distribution to each cylinder. By taking this additional design step, our engineers have gone the extra mile and allowed for an equalization of airflow to within .5% to each individual cylinder port!
The 3.0L B58 engine found in various modern BMW models is a German engineering marvel. Unfortunately, the factory direct injection system is not conducive to making high horsepower or using ethanol flex fuel, which has led many owners to install port fuel injector spacers sandwiched between the cylinder head and factory intake manifold. During the R&D process of the AMS Performance BMW B58 Intake Manifold, our team knew they wanted to incorporate an optimally designed secondary port fuel injection solution as an option for customers.
By moving the injector ports onto the manifold runners themselves, we are able to properly angle injector nozzles directly at the intake valve and combustion chamber instead of at the wall of the intake runners where fuel can puddle. Our team went one step further with this concept by flush mounting the -8AN fuel rail to the manifold and pocketing the runners to allow the injectors to have an even more direct path to spray perfectly atomized fuel to the engine for maximum combustion efficiency.
Features:
- 1250+ HP RATED PARALLEL AIR-TO-WATER INTERCOOLER CORES FOR SUPERIOR COOLING
- AUXILIARY PORT FUEL RAIL WITH -8AN SIDE PORTS FOR EXPANDED FUELING OPTIONS
- COMPUTATIONAL FLUID DYNAMICS (CFD) VERIFIED DESIGN FOR EVEN AIRFLOW DISTRIBUTION
- PROPERLY ANGLED PORT INJECTION FOR IMPROVED FUEL ATOMIZATION
- 135% LARGER CORE AREA COMPARED TO OEM
- THREE (3) EXTRA -4AN ORB PORTS LOCATED ON PLENUM FOR VACUUM SOURCE POINTS
- INCLUDES ALL ANCILLARY COMPONENTS, INCLUDING ALL HARDWARE, LINES, AND FITTINGS
What's Included:
- AMS Performance Intake Manifold w/ Parallel Air-to-Water Intercooler Cores
- AMS Performance Auxiliary Fuel Rail and Port Plugs (Injectors Available Separately)
- AMS Performance Ancillary Components — Including all Hardware, Lines, and Fittings
Confirmed Fitment:
- 2019+ BMW M340i – w/ B58 3.0L Turbo Engine (Incl. G20 and G21 chassis)
Unconfirmed Fitment:
- These vehicles have not been test fit in-house by our engineers, but are likely to be compatible with minimal to no alterations. Note that model years may vary by country and manifold will only have the potential for compatibility with Gen 2/B58c or newer B58 engines.
- 2020+ BMW M440i – w/ B58 3.0L Turbo Engine (Incl. G22, G23 and G26 chassis)
- 2018+ BMW M540i/M540iX – w/ B58 3.0L Turbo Engine (Incl. G30 and G31 chassis)
- 2018+ BMW Z4 M40i – w/ B58 3.0L Turbo Engine (Incl. G29 chassis)
- Various 2018+ BMW 6, 7, 8, and X Series Applications w/ B58 3.0L Turbo Engine
Notes:
- Fuel rail is designed for Bosch injectors such as Injector Dynamics 1050.34.14.14.6. Other Bosch injectors may be compatible with 14mm bore lower and upper o-rings and no top cap.
- Does not fit with OEM engine cover.
- Designed for use with OEM oil filter cap. Aftermarket oil filter cap fitment not guaranteed.
NOTE: Product images shown may not be an exact representation of the actual product.
Model  +  |
Drivetrain  |
|---|---|
| G11 740i 3.0T I6 [B58] | + |
| G20 M340i 3.0T I6 [B58] | + |
| G22 M440i 3.0T [B58] | + |
| G29 Z4 M40i 3.0T I6 [B58] |
Return and Exchange Policy
The Return & Exchange Policy below outlines our current terms. While we try to adhere strictly to the guidelines detailed below, there are always exceptions to the rules, please speak to a BMP Tuning Customer Support Representative for clarification on anything you might have questions about - contact us.
Order Cancellations
Order Cancellation Hours of Operation
- All order cancellations are processed during regular business hours only. Any order cancellation requests made outside of normal business hours will be processed during the next business day.
Order Cancellation Fees
- Any cancelled orders including orders that have not shipped will be subject to a 5% cancellation fee to offset order processing fees that are not refunded to BMP Tuning by financial institutions and fee is waived completely if store credit is requested.
- Cancellation fee applies to any order regardless of stock status, please contact BMP Tuning if there are any questions regarding stock status before placing an order.
- If an order has already been processed or shipped and BMP Tuning is unable to cancel the order, the customer will be responsible for returning the item to us once received. Once the return is received it will be processed like any other return and be subject to the "Return and Exchange Policy" listed below.
- Certain products sold cannot be cancelled after the order has been placed due to agreements with the manufacturer, or in the case of made to order/custom items. This may be noted in the product description, but feel free to contact us to make sure before ordering.
- Any order placed via Katapult are non-refundable; refunds, if required, will be issued via store credit only.
Return & Exchange Policy
Domestic Orders
- BMP Tuning will accept returns for unused products within 1 year/365 Days from the date of purchase.
- Returned products must be new, unused, and must be in the original packaging, including labeling, manuals, hardware, etc. Special order items are non-refundable.
- Returns will NOT be processed for any received products without the proper RMA Form completed and included with the return, customer will also be responsible for return shipping to their original shipping address.
- Returns beyond 60 days of original purchase once processed can only be refunded as BMP Tuning store credit.
- In the case of an exchange, BMP Tuning will waive normal restocking fees and only collect for original shipping of the returned product unless otherwise stated by a BMP Tuning Customer Service Representative when requesting your RMA number.
- Once store credit has been issued for a return, it is final and cannot be reversed or exchanged for a refund to your original payment method at a later time. Please ensure you are comfortable with receiving store credit before completing your return.
- Contact us within 7 days of delivery if an item has arrived damaged or incorrectly so that we can rectify the situation with the responsible party. Any notifications past 7 days from delivery could cause issues with replacement and BMP Tuning is not liable for any mis-shipments or damaged items if notified past the 7th day.
- Once delivered to shipping address provided, packages are customer’s responsibility—consider requesting a signature upon delivery or insuring your order with Route.
International Orders
- New, unopened products can be returned within 60 days of purchase.
- Opened/used products and Scratch & Dent parts cannot be returned.
- Contact us within 7 days if your item is damaged upon receipt.
- Once delivered, packages are customer’s responsibility—signature confirmation is available upon request.
- Any international orders that are refused at the time of delivery will be subject to carrier abandonment of the package, at which time the ordered products would be discarded by the carrier. The customer will not be refunded for the value of the order and the discarded products are no longer retrievable.
Return Fees & Shipping:
- Customer is responsible for a 20% restocking fee, original shipping, and return shipping.
- In instances where the customer received FREE shipping, the shipping amount that BMP Tuning paid on behalf of the customer will be deducted from the total refund.
- BMP Tuning's restocking fee is waived in the instance customer requests store credit as long as the item is being returned to BMP Tuning and not the manufacture directly.
- Any orders that are returned to BMP Tuning as refused by receiver or non-deliverable will be subject to a return handling fee and will be processed as a return in compliance with our "Return and Exchange Policy", including a 20% restocking fee.
- Any returns that are denied for any reason will be sent back to the customer at the customers expense. Any denied return left with BMP Tuning longer than 30 days is considered forfeited by the customer and will be disposed of by BMP Tuning at BMP Tuning's discretion.
- Any order placed via Katapult are non-refundable; refunds, if required, will be issued via store credit only.
Route Shipping Protection - Refunds & Cancellations
- Route shipping protection is an insurance purchased for your shipment. Because of this, any protection on items that have already been shipped cannot be refunded.
- If your order is cancelled PRIOR to the items shipping, then the Route purchase can be refunded with the cancelled item(s). Once the order has shipped, we cannot refund the Route shipping protection.
Tariffs & Duties – No Refund Upon Return
- BMP Tuning is not responsible for any tariffs, duties, or import fees charged by customs authorities or shipping carriers.
- If you return an item, any tariff or duty you paid at delivery will not be refunded by BMP Tuning, as those are non-refundable government charges.
- Refunds for returned items will be limited to the cost of the product (minus applicable fees), not including any tariffs or duties originally paid.
- Please ensure you understand your country’s import fee obligations prior to ordering.
- If you have questions about potential tariffs, duties, or returns, contact us before placing your order—we’re happy to assist.
- All existing policy conditions (restocking fees, RMA requirement, return shipping responsibilities) still apply as stated in the original policy.
Product Return Exemptions
Tuning Software And Cables
BMP Tuning will NOT accept returns for any tuning software or tuning cables. This includes, but is not limited to:
- ECU Tunes
- TCU Tunes
- Tuning Cables such as IE POWERlink V4 Flash Cable, APR Ultralink, Unitronic UniCONNECT+ Cable, 034Motorsport Dynamic+ Tuning Cable
- Plug and Play Tuners such as Burger Motorsports JB4, COBB AccessPort
- OBDEleven Pro
Scratch & Dent, Open Box, and Clearance Items
There are absolutely no returns on any product sold as "Scratch & Dent", "Open Box", or "Clearance."
Pricing Or Photo Errors
- While we always try to provide the most accurate product and pricing information, we are humans and can make mistakes. If we listed an incorrect price or information for any product on our site, BMP Tuning reserves the right to refuse or cancel any orders placed. PRICING AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
- We try to ensure that all products are represented properly in description and photo. However, due to photos provided from manufacturers, sometimes a photo might be outdated or a generic photo for the part may be used for the item. If you have any questions about any product, please contact us before placing your order.
Need help with your order?
